Cutting machines

The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 360cms long in standard what enables assembling on a table 335cms maximum wide or smaller. The width of the fabric is 330 cm. The device cuts precisely and presses the material, cutting width and front rail lifting height can be adjusted, automatic or manual front rail lifting. You save material and labour cost. Voltage 230 V, motor pow

Variable speed control of the blade facilitates the cutting of diverse fabrics. The blowing from table top makes the airspace under cutting fabric what facilitates the maneuvering of it. Oshima band knife is equipped with the special detector (responsible for the work of band knife blade) and with the band knife security system BSS (protects band knife blade from escape from the course). Thank to this solution working with band knife machine become to be more safety. Stainless steel protective g

JEMA JM-130LR is an automatic device for cold and hot cutting of medium and thick materials at right angles. Application of the cutting machine Automatic tape cutting device JM-130LR is perfect for cutting loops, soft cables, lines, plastic zipper tapes, elastic tapes, upholstery tapes, etc. See how to set the cutting parameters step by step on the example of a webbing strap 3bAsWIc4Cbw Specification: The length of the sections - 1-9999 mm Exemplary cutting capacity - 100 sections / 50mm / 1min

Universal knife for light cutting, good workmanship and user-friendly. Cutting height 10 mm, motor power 50 W, voltage 230 V. Set with 2 hexagon shape 50 mm cutting blade and with spare carbon brushes.

It is designed for fabric and knitted fabrics as well as for carpets. The cordless operation gives you freedom of movement and independence of the power network. Blade diameter 60mm. Working voltage 9.6VDC, power 200W. Cutting capacity: fabric up to 10 layers, carpet up to 12mm. Wight with battery attached 1.14kg. With full battery, you can cut cloth for 800 meters or carpet for 100 meters.

JEMA JM-120HLR is an automatic cold & hot knife label cutting machine (straight cut) with a laser sensor for measuring labels’ length. New feature: The JM-120 series machines with hot knife now have a function for adjusting the blade sinking time . Features: High speed: The machine can cut 120 pieces per minute (with a cutting length of 50 mm). High precision: Photoelectric induction can accurately capture the cutting line of the trademark, to precisely control the effective cutting length each

Automatic, multifunction hot and cold knife cutting machine (straight cut). While cutting the tape, the machine can also punch holes of different diameters. Application: All kinds of woven belts, Velcro, shoelaces, plastic soft wires, computer cables, labels, etc. Specification: Model JM-150LR Cutting length (mm) 30-99999 Cutting speed (50 mm pcs/min) 150 Max. cutting width (mm) 95 Max. blade temperature (°C) 350 Recommended air pressure (MPa) 0.2-0.6 Voltage (V) 220 Punching hole diameter (mm)

JEMA JM-120L is an easy-to-use automatic cutting machine with a wide range of applications. The high cutting quality will help you increase production efficiency, improve product quality and reduce costs. Features: High speed: The machine can cut 110 pieces per minute (with a cutting length of 50 mm). High precision: Driven by stepper motor to ensure high precision in every operation. Compensation function: Due to different materials, when the cut-out effect does not match the input size, you on

Application: woven tapes, strip tapes, plastic soft tube, plastic zipper, small webbing etc. Cutting length - 1-9999 mm Cutting capacity - 90pcs/50mm/1min Max. cutting width - 105 mm Voltage - 230/240 V Power - 0.22 kW It is possible to order a 110V machine.

Texi Sirius-P 1390 - CO2 plotter for cutting and engraving . A laser device for cutting and marking fabrics, wood, plastic, plexiglass, rubber, glass and ceramics. CO2 laser with a power of 130 W and a working area of 1300 x 900 mm. Modern laser cutting and engraving Texi Sirius-P is a professional device for cutting and engraving that allows you to obtain unusual effects in the production of clothing, leather goods, upholstery , advertising products, toys, decorations or packaging. The maximum

Filtering system for laser devices with a working surface of 1600x1000mm. Used for air filtration in laser cutting and engraving, laser marking, laser welding, soldering and printing. The system capacity is 1500m3 / h Specification: power: 1.2 kW Power supply: 110 / 220V Pressure - 3500Pa / 0.04Bar 4 separate layers of filters 99.7% filtration Equipped with a remote control LCD panel displaying pressure and air flow and a warning system about the required filter replacement. A key to close the c

ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner.Cloth press rails are 250cms long in standard what enables assembling on a table 220cms maximum wide or smaller. The device cu

Automatic, multifunction, hot knife cutting machine (straight/bevel cutter) with automatic tape feeding and adjustable melting time. While cutting the tape, the machine can also punch holes of different diameters. Application: All kinds of woven belts, Velcro, shoelaces, plastic soft wires, computer cables, labels, etc. Specification: Model JM-150HX Cutting length (mm) 30-99999 Cutting speed (50 mm pcs/min) 150 Max. cutting width (mm) 65/40 Max. blade temperature (°C) 420 Recommended air pressur

JEMA JM-120HL is an easy-to-use automatic cutting machine with a wide range of applications. It can help you increase production efficiency, improve product quality and reduce costs. Features: High speed: The machine can cut 110 pieces per minute (with a cutting length of 50 mm). High precision: The photoelectric sensor can accurately capture the cutting line of the trademark, to precisely control the effective cutting length each time. Compensation function: Due to different materials, when the

Automatic, multifunction cold knife cutting machine (straight cut). While cutting the tape, the machine can also punch holes of different diameters. Application: All kinds of woven belts, Velcro, shoelaces, plastic soft wires, computer cables, labels, etc. Specification: Model JM-150L Cutting length (mm) 30-99999 Cutting speed (50 mm pcs/min) 150 Max. cutting width (mm) 95 Max. blade temperature (°C) 350 Recommended air pressure (MPa) 0.2-0.6 Voltage (V) 220 Punching hole diameter (mm) 2-8 Power

Application: woven labels, printed labels, ribbon tapes, bag bands etc. Cutting length - 20-99999 mm Cutting capacity - 100pcs/50mm/1min Regulation of feeding speed Max. cutting width - 100 mm Max. blade temperature - 420°C Voltage - 230/240 V It is possible to order a 110 V machine.

ATTENTION our cutters are equipped with 2nd, job facilitating, rear cloth press, what make them different from competitive cutters equipped only with front press. During comparing prices, check exactly what you will get in the return. The set consists of: cutter and material feeder, automatic layers counter, rear cloth press, front cloth press rail with the cutter runner. Cloth press rails are 260 cm long in standard what enables assembling on a table 230 cm maximum wide or smaller. The device c