Feet

v9iohNjo1is?version=3&loop=1&playlist=v9iohNjo1is TEXI 1054 is a foot for sewing-on pearls and beads up to 4 mm. Equipped with guide for precise guiding of pearls. To use this foot we have to hide the knife and remove the left needle.

Zipper foot for sewing machines with needle feed. Zipper foot with a high front runner.

Compensating inside foot with 4mm right guide

Narrow shirring foot for industrial lockstitch machines with bottom feed.

Standard foot for industrial sewing machines with needle feed. Foot with needle guard for single needle lockstitch machines.

Specially designed quilting foot which lifts itself with needle jump what allows to free movement of material and let you to "paint" thread on fabric. Infinite possibilities during quilting. Its transparency facilitates sewing and give you absolute control. Suitable for most of household sewing machines with shuttle hook (Janome, Brother, Elna, Toyota, Husqvarna etc.) and for Texi Tutu and Texi Ballerina.

Foot with the right tape guide, 19.0 mm wide. Foot for industrial sewing machines with bottom feed.

Single layer fabric shirring foot. Suitable for most of household sewing machines (Janome, Texi, Bernina, Brother, Łucznik, Elna, Toyota, Husqvarna etc.) with shuttle hook. Matches sewing machines with low attachment.

4.8 mm hemming foot for the industrial sewing machines. The foot allows the edge of the material to be rolled up without ironing or pinning.

Foot for hemmer with a maximum width of 7.5 mm • The construction of the foot enables precise positioning of the coiler in relation to the material • For machines with bottom feed

Special foot for simultaneously sewing in piping. Suitable for Janome 204D 134D, 184D, 204D, 534D, 634D, 734D, 744D, 990D overlock machines.

Specially constructed foot equipped with guide for equal lead of sewing in beads. Suitable for Janome 204D and Janome 744D overlock machines.

Foot for industrial lockstitch machine with bottom feed. 11 mm foot without the needle guard.