Set contain: - specially constructed foot (equipped with two transporting rings to facilitate materials move) - 3 different sizes folders 1/2"" (12,7 mm), 3/4"" (19 mm), 1"" (25,4 mm) - guide to sewing in pressed edging or tape, up to 20 mm - edge guide

Special foot for finishing with blind stitch e.g. bottoms, sleeves etc. Equipped with guide for equal lead of material. Suitable for most of household sewing machines with horizontal rotary hook (Janome, Brother, Elna, Toyota, Husqvarna etc.).

Shirring foot for fine fabrics. For simultaneous shirring the bottom layer of material and sewing the upper layer with guiding of its edge. Perfect for shirring frills, curtains, ruffles. Easy to install. Suitable for most of household sewing machines with shuttle hook (Janome, Brother, Elna, Toyota, Husqvarna etc.) and for Texi Tutu and Texi Ballerina.

Special foot for cord and piping of 7 thin inset . Grooves on the bottom allows for precise foot conduct on the sewing piping. Suitable for sewing machines with horizontal rotary hook and stitch width 9 mm - Janome MC8200QC, Janome MC8900QCP i Janome MC12000.

Attachement allows to sew circles with a diameter of 8 cm to 26 cm. When sewing with this attachement you can choose every stitch. You can use twin or triple needles as well. Suitable for sewing machines with horizontal rotary hook and stitch width 9 mm - Janome MC8200QC, Janome MC8900QCP, Janome MC12000 and for machines Janome XL601, DXL603, QXL605, TXL607, MC7700QCP, MC6600P, MC11000.

Hemming foot for 6 mm. Perfect for delicate fabrics. Suitable for sewing machines with horizontal rotary hook and stitch width 9 mm - Janome MC8200QC, Janome MC8900QCP i Janome MC12000.

Piping and cording foot. Suitable for most of household sewing machines with horizontal rotary hook (Janome, Texi, Brother, Elna, Toyota, Husqvarna etc.).

Special sequin (from tape), ribbon and tape sewing foot. Equipped with guide which doses a sequins on tape. Width of guide 8 mm. Perfect for creating original outfits and fancy designs. Suitable for most of household sewing machines (Janome, Brother, Elna, Toyota, Husqvarna etc.).

Special foot for simultaneously sewing in piping. Suitable for Janome 204D 134D, 184D, 204D, 534D, 634D, 734D, 744D, 990D overlock machines.

Special foot for finishing with blind stitch e.g. bottoms, sleeves in blouses made by polar, tricot etc. Equipped with guide for equal lead of material. Suitable for Janome 204D and Janome 744D overlock machines.

Special foot for piping. Grooves on the bottom allows for precise foot conduct on the sewing piping. Suitable for sewing machines with horizontal rotary hook and stitch width 9 mm - Janome MC8200QC, Janome MC8900QCP i Janome MC12000.

Shirring foot for fine fabrics. Perfect for shirring frills, curtains, ruffles. Easy to install. Suitable for most of household sewing machines with horizontal rotary hook (Janome, Brother, Elna, Toyota, Husqvarna etc.).

Specially constructed foot equipped with guide for equal lead of sewing in beads. Suitable for Janome 204D and Janome 744D overlock machines.

Specially designed quilting foot which lifts itself with needle jump what allows to free movement of material and let you to "paint" thread on fabric. Infinite possibilities during quilting. Its transparency facilitates sewing and give you absolute control. Suitable for most of household sewing machines with shuttle hook (Janome, Brother, Elna, Toyota, Husqvarna etc.) and for Texi Tutu and Texi Ballerina.

Enables lead cord on the edge of the material. It is perfect in combination with hemstitch (rolled hem). Suitable for JANOME 184D, 204D, 534D, 634D, 734D, 744D, 990D.

Foot for perfectly straight "stitch in the ditch". The guide on the foot spreads the seams allowing you to stitch perfectly in the ditch, and is also useful when adding decorative top stitching along seams.

Everything you need for quilting: 1- Feed foot 2 - Quilting guide for feed foot 3 - Darning Foot 4 - Custom crafted zigzag foot 5 - Cloth guide with thumb screw 6 - 1/4"" seam foot