Ironing accessories

Set consists of a sleeve buck 640x125x80 mm and a fastening arm. The buck equipped with 150 W heater and 36 mm outside diameter connecting tube.

Maximum flow rate 2,8 m^3/h, connector diameter 1", filter insert 10"

PTFE shoe reduces the temperature of ironing. It allows to receive a dry steam together with safe temperature for material. Moreover - the PTFE shoe: - prevents material against scorches and shinings - reduces the ironing temperature (around 40° C) - allows to receive a dry steam and relatively low ironing temperature - allows good and equable spreading of steam - ensures excellent slide and smoothness of ironing - protects the iron""s base plate - equipped with silicone rubber preventing agains

Covering the bottom plate of the Texi Apollo 101 ironer with dimensions of 990 x 290 mm. A water-resistant, metalized cover that is shaped and sized to the base of the ironing machine, on a comfortable elastic band that allows for quick replacement.

Special trolley for BATTISTELLA steam generators: VAPORINO, VAPORBABY, SATURNINO, BARBARA, OPERA, STELLA, LUNA, DIANA. Height 77 cm. Robust, stable construction, suitable for small steam stations with an iron. The generator is securely attached to the base with a screw. It enables easy movement between work stations. Perfect solution for ateliers and tailor shops, clothing stores, guesthouses, etc.

Generally felts are used to spread the steam equally and to protect the clothing from spots caused by uneven steam distribution. The most commonly used felts are made of polyester, which offer a sufficient range of temperature resistance for most applications at a competitive price. Polyester needle felt V202 is used on ironing tables and presses, to obtain a constant ironing result. Temperature resistance up to 180C. Length of roll ca. 30 meters.

The hanger matches to board type ironing tables: Andromeda, Era, Nettuno. The set does not include the spring balancer and the iron fastening rod, which should be selected separately, depending on the weight and type of the iron.

Inox shoe is equipped with a distance washer, that allows to separate the iron's base plate and the material. It reduces the ironing temperature without changing the quality of steam. Moreover - the Inox shoe: - transfers very good the temperature from iron to ironed material [without distance washer] - with distance washer allows to correct the humidity of steam and ironing temperature - allows good and equable spreading of steam - ensures excellent slide and smoothness of ironing - protects th

Filter insert 10"

The hanger matches to all Urano ironing tables, with the exception of the special table for ironing net curtains and curtains. The set does not include the spring balancer and the iron fastening rod, which should be selected separately, depending on the weight and type of the iron.

Very elastic and durable suppleness siliconed foam, super soft, perfect steam/air permeability and distribution. Content of silicone rubber ensures its increased mechanical and thermal resistance, up to 150°C. It is long periods of dampness resistant. Designed for multi-layer ironing tables and presses covers, as the softening foam. The specific elasticity enables effective ironing without any risk of prints. In the ""ironing pads and covers"" category you will find products which you can put to

Generally felts are used to spread the steam equally and to protect the clothing from spots caused by uneven steam distribution. Needle felt V249, with interlining which makes it more resistant to tension occurred on vertical presses or caused by irons on ironing tables. Used especially for ironing wool fabrics (e.g. Cashmere coats) or similar garment. When using just put the garment directly upon the felt, without any additional textile cover between them, to preserve the natural look of the ga