Ironing accessories

Siliconed foam with special structure: along the foam, in its central part, 80-millimeter-wide strip of ultra soft foam is placed. End of problems with shined side seams of trousers (as well as jackets, coats, etc.): when ironing the seams sink into ultra soft foam strip, so they are not unduly pressed, and this prevents from shinings. At the same time creases of trousers are ironing on tougher part of foam. Very elastic and durable soft/ultra soft siliconed foam, perfect steam/air permeability

Dimensions 300x570x55 mm. The buck equipped with 250 W heater and 56 mm outside diameter connecting tube.

PTFE shoe reduces the temperature of ironing. It allows to receive a dry steam together with secure for material temperature of ironing. Moreover - the PTFE shoe: - prevents material against scorches and shinings - reduces the ironing temperature (around 40° C) - allows to receive a dry steam and relatively low ironing temperature - allows good and equable spreading of steam - ensures excellent slide and smoothness of ironing - protects the iron""s base plate - equipped with silicone rubber prev

All metal wire screens can be used as final covers on upper press plates. In order to avoid shine you may fix up to 3 layers of metal wire screen to the press. Moreover metal wire screens are used as steam diffusers (No.20, No.50) and filters (No.50, No.60) by putting them directly upon the metal press plates. Depending on the mesh No. (No.50 = wide, No.60 = medium, No.100 = tight) and the weaving method (plain/smooth or twill woven) the metal wire screens are suitable for different kinds of clo

Temperature resistance up to 200C, color white, length of roll ca. 10 meters. Material like bristle cover MII backed with the needle felt. More heat resistant, possible to be fixed on upper press plates. Bristles prevent from shine and give the desired rough and fresh finish to the clothing. Used on ironing tables and presses as final cover for ironing velvet fabrics, petersham, wool or similar fabrics.

PTFE shoe reduces the temperature of ironing. It allows to receive a dry steam together with secure for material temperature of ironing. Moreover - the PTFE shoe: - prevents material against scorches and shinings - reduces the ironing temperature (around 40° C) - allows to receive a dry steam and relatively low ironing temperature - allows good and equable spreading of steam - ensures excellent slide and smoothness of ironing - protects the iron""s base plate - equipped with silicone rubber prev

Dimensions 110x1260x95 mm. The buck equipped with 200 W heater and 56 mm outside diameter connecting tube.

PTFE shoe reduces the temperature of ironing. It allows to receive a dry steam together with secure for material temperature of ironing. Moreover - the PTFE shoe: - prevents material against scorches and shinings - reduces the ironing temperature (around 40° C) - allows to receive a dry steam and relatively low ironing temperature - allows good and equable spreading of steam - ensures excellent slide and smoothness of ironing - protects the iron""s base plate - equipped with silicone rubber prev

Dimensions 750x50 mm. The buck equipped with 150 W heater and 56 mm outside diameter connecting tube.