MvvJSzs2SVc?version=3&loop=1&playlist=MvvJSzs2SVc MASK FOLDING AND CUTTING SET is a technological line for the production of disposable protective masks . Equipment set - continuous fusing machine, automatic tape cutting machine, and binder for pleats making - set of devices molding and cutting the elements. The set significantly speeds up and streamlines the process of producing protective masks. In the modern world, you need a universal solution. The MASK FOLDING & CUTTING SET set is a respons

The most popular, universal continuous fusing machine. The belts width 45 cm. One side open machine makes possible fusing the fabric width larger than the width of belt. It is also possible to fuse on the edges without the necessity of thermal processing whole the surface of fabric. The only criterion is the dressing width, which should not exceed 44 cm. Good pressure up to 1,5 kg/cm^2 and the electronic temperature control assure excellent (even and durable) join of the fabric with fliselin or

MvvJSzs2SVc?version=3&loop=1&playlist=MvvJSzs2SVc MASK FOLDING AND CUTTING SET is a technological line for the production of disposable protective masks . Equipment set - continuous fusing machine, automatic tape cutting machine, and binder for pleats making - set of devices molding and cutting the elements. The set significantly speeds up and streamlines the process of producing protective masks. In the modern world, you need a universal solution. The MASK FOLDING & CUTTING SET set is a respons

Stitched collar must be put on the metal form. Next the adjustable - depending on collar shape - pneumatic driving knives cut the fabric surpluses. Finally the special, pneumatic controlled finger pushes out the collar corner and the service person overturns it to the right side. Voltage 230V, pressure 0,4 - 0,5 Mpa, net weight 40 kg. The compressed air necessary.

Detection width 600 mm [belt in the machine should be 600 mm wide], detection height 180 mm. Total (outside) height of the gate 340 mm, inside height 180 mm. Outside width of the gate 1000 mm.

Special two-station fusing press machine for transfers. Work surface of both plates 10x10 cm. Designed for fusing in small, hard to reach places. The upper heating board is protected by PTFE material which prevents against scorches and shinings and facilitate cleaning. On the lower plate there is a special elastic silicone rubber which is indispensable for good transfer quality. Electronic regulation of temperature and fusing time and the uniform distribution of pressure and temperature assure d

Variable speed control of the blade facilitates the cutting of diverse fabrics. The blowing from table top makes the airspace under cutting fabric what facilitates the maneuvering of it. Oshima band knife is equipped with the special detector (responsible for the work of band knife blade) and with the band knife security system BSS (protects band knife blade from escape from the course). Thank to this solution working with band knife machine is more safe. Stainless steel protective gloves as a p

Highly efficient, wide continuous fusing machine. The belts width 90cm. Good pressure up to 5kg/cm^2 and the electronic temperature control assure excellent [even and durable] join of the fabric with fliselin or interlining. The cooling of fused elements stabilizes them immediately and prevents the deformation.The strip scrapers prevent the gluing from sticking to the tapes.. Heaters power 12 kW, voltage 400V. Maximum temperature 200 Celsius. Compressed air required. Min consumption 5~10L/H.

The most popular, universal continuous fusing machine. The belts width 52cm. One side open machine makes possible fusing the fabric width larger than the width of belt. It is also possible to fuse on the edges without the necessity of thermal processing whole the surface of fabric. The only criterion is the dressing width, which should not exceed 51cm. Good pressure up to 1,5kg/cm^2 and the electronic temperature control using the touch panel assure excellent [even and durable] join of the fabri

Highly efficient, wide continuous fusing machine with long bottom belt, which increases production capacity. The belts width 90cm. Good pressure up to 5kg/cm^2 and the electronic temperature control using the touch panel assure excellent [even and durable] join of the fabric with fliselin or interlining. The cooling of fused elements stabilizes them immediately and prevents the deformation. The rotary scrapers prevent the interlining clinging to the belts. Heaters power 12,6 kW, voltage 400V. Ma

Metal detector by method of the magnetic induction. Detects broken needles and other foreign metal pieces, left in the clothes during the production process. Indispensable for producers of children""s clothes and toys. Recommended for medicine industry, food industry and sanitary material industry. It has a very high sensibility and stable detecting capability [detects even 0.8 mm needle pieces, like their broken tips]. Precisely locates the position of the detected element. Machine indicates pr

Highly efficient, wide continuous fusing machine. The belts width 100cm. Good pressure up to 5kg/cm^2 and the electronic temperature control using the touch panel assure excellent [even and durable] join of the fabric with fliselin or interlining. The cooling of fused elements stabilizes them immediately and prevents the deformation. The rotary scrapers prevent the interlining clinging to the belts. Heaters power 15 kW, voltage 400V. Maximum temperature 200 Celsius.

Highly efficient, wide continuous fusing machine with long belt. The belts width 160cm. Good pressure up to 5kg/cm^2 and the electronic temperature control using the touch panel assure excellent [even and durable] join of the fabric with fliselin or interlining. The cooling of fused elements stabilizes them immediately and prevents the deformation. The rotary scrapers prevent the interlining clinging to the belts. Heaters power 28 kW, voltage 400V. Fusing time 5-34 sec., maximum temperature 200

Highly efficient continuous fusing machine with long belt. The belts width 100cm. Good pressure up to 5kg/cm^2 and the electronic temperature control assure excellent [even and durable] join of the fabric with fliselin or interlining. The cooling of fused elements stabilizes them immediately and prevents the deformation. The rotary scrapers prevent the interlining clinging to the belts. Heaters power 21,6 kW, voltage 400V. Fusing time 5-34 sec., maximum temperature 200 Celsius. The compressed ai

The most popular, universal continuous fusing machine . - equipped with a touch panel - the belts width 45 cm - one side open machine makes possible fusing the fabric width larger than the width of belt. It is also possible to fuse on the edges without the neccesity of thermal processing whole the surface of fabric. Maximum dressing width 44cm - maximum pressure 1,5kg/cm^2 - electronic temperature control assure even and durable join of the fabric with fliselin or interlining - rotary scrapers p

Special fusing press machine for transfers. Work surface 10x10 cm. Designed for fusing in small, hard to reach places. The upper heating board is protected by PTFE material which prevents against scorches and shinings and facilitate cleaning. On the lower plate there is a special elastic silicone rubber which is indispensable for good transfer quality. Electronic regulation of temperature and fusing time and the uniform distribution of pressure and temperature assure durable transfer. Machine eq

Handy type device which detects broken needles, pins and other metal pieces left in clothes, toys, bed-clothes etc. during the production process. It has a very stable detecting capability and 2 steps sensitivity adjustment (Hi or Low). When detects the metal piece, the alarm buzzer rings and lamp turns on. Don""t settle ON-25 in the place where is high temperature or under sunlight, avoid humid places. It must avoid high frequency machinery. Don""t let other metal articles be closed to ON-25 du

Small continuous fusing machine. After install suitable hemmers it is designed for pressing up the pockets and "battens" called also shirt "houses". It encrease the quality and productivity. During 8 hours period it is possible to press up for example over 200 pairs (for right and left sleeve) the shirt "battens". The maximum temperature - 300 Celsius, heaters power 2 kW, voltage 230V. In the standard accessories there is placed one typical hemmer for shirt pockets.

Stitched collar is put on a metal form. Next, the adjustable - depending on collar shape - pneumatic driving knives cut the fabric surpluses. Later the special, pneumatic controlled finger pushes out the collar corner and the operator overturns it to the right side. Finally the collar is put on the form, which is adapted to its shape. The collar is formed [ironed] under the influence of pressure and temperature. Time, pressure and ironing temperature are electronically controlled. Production eff