Spreading machine for woven, nonwoven and technical fabrics with a stand for 6 rolls and a table with blowing

Product Description

The spreading machine is the most powerful device for spreading of difficult woven, non-woven and technical fabrics. The machine is equipped with a stand for 6 rolls of fabric and 12 m table.

Modern spreading machine

J3-190 + R6-190 OSHIMA + TABLE 12M SET can spread fabric up to 1900 mm wide, and the stand can hold 6 fabric rolls up to 200 kg in weight and up to 800 mm in diameter. The maximum speed of the spreader is 95 m/min. The machine has strong 6 rolls stand which increases spreading efficiency in high-volume, multi-layer productions. The spreading machine is especially recommended for the production of isolation gowns, medical masks and other from technical fabrics.

Efficient spreading

The device for spreadingwoven, non-woven and technical fabrics J3-190 + R6-190 OSHIMA + TABLE 12M SET spreads the material on one side - face up. The machine is standard equipped with a cutting device and a catcher device. The machine is controlled by a practical touch panel. The interface is intuitive and user-friendly. The J3-190 + R6-190 OSHIMA + TABLE 12M SET model is equipped with a large and durable stand for 6 material rolls. Spreading machine comes with 12 m table (10 segments, 1.2 m each). Table is equipped with blowing.
Technical data:

- main device power 1KW
- table blowing turbine - 2,2 KW
- Lay height 160 mm
- maximum travel speed 95 m/min
- maximum material roll diameter 800 mm
- maximum weight of a roll of fabric 200 kg
- maximum width of the material 1900 mm

The cutter shown in the photo is not part of the set and must be ordered separately.